Canon imageRUNNER ADVANCE C5560 Configuration And Installation Manual page 35

Unregister all Custom / Plain Media from Auto Correct Color
Tone
Note: This process is done at the imageRUNNER ADVANCE C5500 when reloading
the imagePASS-P1.
1. Unregister Custom / Plain Media for Auto Correct Color Tone
a. Settings/Registration  Adjustment/Maintenance  Adjust Image Quality 
Auto Correct Color Tone Settings
b. Register Correction Pattern
c. Yes
If the <Register Correction Pattern> screen shows all patterns
Heavy 7 or "Not Registered", then press Cancel. Skip this section and
proceed to step 2 : "Launch Command Workstation"
If the screen shows patterns with other media, then continue with the next step 5)
to unregister all other media.
d. Press Cancel.
e. Place some 8 ½ x 11 paper on Multi-purpose tray and register it as Heavy 7.
f. Perform Auto Adjust Gradation for Heavy 7 media.
o Settings/Registration  Adjustment/Maintenance  Adjust Image
Quality  Auto Adjust Gradation
o Perform Auto Adjust Gradation on Heavy 2-7
o Select Full Adjust
35
imageRUNNER ADVANCE C5560 with imagePASS-P1 Full Service Configuration and Installation Guide