Canon imageRUNNER ADVANCE C5560 Configuration And Installation Manual page 30

Configuring Manual Fiery Settings
The Server name and Date & Time settings need to be manually configured. Follow the
steps below to configure these settings:
1. Log in to the Fiery using Command Workstation then click [Server]  [Configure] x2
Then click Configure
2. Select Fiery Server  [Server Name] then enter the server name using the FedEx
Office approved naming convention as shown then click [Save].
Fiery Server
Server Name
30
imageRUNNER ADVANCE C5560 with imagePASS-P1 Full Service Configuration and Installation Guide
FXO Setting
Server name contains 15 characters including dashes
Format :
<Two Digit State Code><Four Digit Center # >-<C0><Model>-<1>
"TX1234-C05560-1"
Example :
Remark
Explanation : The example shows a
center in 'Texas' with a center
number of '1234' an engine model
5560 and the first device of it's model
in the center '1'