Canon imageRUNNER ADVANCE C5560 Configuration And Installation Manual page 32

Note: Only remove the Operator password. The Administrator password should not
be changed. After removing the password, ************* characters will still appear.
This is normal.
5. Click the Reboot button to reboot the server and apply the changes.
6. Log in to Command Workstation using the Operator account and ensure that a
password is not required.
Note: If a password is required, launch 'Configure' again as in Step 4 to remove the
Operator password and reboot the controller.
32
imageRUNNER ADVANCE C5560 with imagePASS-P1 Full Service Configuration and Installation Guide