Canon imageRUNNER ADVANCE C5560 Configuration And Installation Manual page 15

Configuring Printer Settings
A. User Mode Settings
During the execution of the VKT package some user settings are transferred
automatically. The highlighted settings in the table below need to be entered
manually. The entire table can be used to verify other settings if desired. After the
VKT package has been loaded, the System Manager ID and PIN will be changed to
the following: System Manager ID: 1111
Note: If the center does not observe Daylight Savings Time ensure the
[Daylight Saving Time] setting is turned off.
Settings Registrations Path
Preferences
Display Settings
Store Location Display Settings
Display Remaining Toner Error Message
Display Logged-in User Name
Default Screen at Startup
Time/Energy Settings
Date/Time Settings
Auto Sleep Time
[Time Settings for Auto Adjust Gradation]
Sleep Mode Energy Use
Use Motion Sensor
Confirm Network Settings
Network>TCPIP Settings
Proxy Settings
15
imageRUNNER ADVANCE C5560 with imagePASS-P1 Full Service Configuration and Installation Guide
Setting Desc.
Mail Box - On, Off
Network – On, Off
Memory Media – On, Off
On, Off
On, Off
Default Control Panel Screen
Date and Time
Time Zone
Daylight-Saving
Time: On, Off
5 min.- 4 Hours
Set times for daily automatic operation
Energy Use
On, Off
Network
Enable Settings
internet.proxy.fedex.com
port 3128
System Manger PIN: 1111.
FXO Settings
Mail Box – Off
Network – Off
Memory Media - Off
Current Local Time
location dependent
6:30am (all days)
Check if Done


On

Off

Copy



On

4 Hours


High

Off

On

On