Home Screen Overview; User Modes - SystemAir SAVE VTC 200-1 Service & Accessories Installation Manual

Back button to return to a previous
menu, located at the upper left corner
Up arrow to increase a value
Down arrow to decrease a value
Some menus have more than one page. Touch page indicator in the top right corner to go to the next page. The first
number indicates current page number and the second number indicates a total number of pages available.
Many options show up in a form of the pop-up window. Select the option from the displayed list in the pop-up window
and press OK to confirm selection.
3.3

Home screen overview

1. Menu
2. Active user mode
3. Temperature settings
4. Airflow settings
5. Alarms and warnings
6. Status line
7. Outdoor temperature
A. Return to home screen
B. Basic read-only information about the unit
C. Currently active alarms and alarm history
D. Configure and check week schedule
3.3.1

User modes

The first icon at the top of home screen shows currently active user mode. To change the user mode, touch the active
user mode icon (pos. 2) and select a new user mode from the list. The unit has 2 permanent and 5 temporary user
modes available for selection. Only one mode can be active at a time.
Settings of all modes can be modified in Service menu.
3.3.1.1 Permanent modes
Permanent modes are always active unless interrupted by temporary modes, activated user functions or alarms:
| v1
On and Off slider to activate or
deactivate a function. White bubble —
function is inactive, green bubble —
function is active.
Button to cancel changes
CANCEL
Buttons to confirm changes
SET/OK
E. Check and change remaining time till filter change
F. General system preferences
G. Configuration of all system parameters
H. Help and troubleshooting menu
3
Configuration |