Table of Contents
Advertisement
Addon Redundancy
Illumination Power
Level
Transmit AIM Code ID
DATA OUTPUT
Data Output
allows users to set the way to output decoded data. Depends on the
module, the available functions may be slightly different.
Item
Keyboard Emulation
Timeout between
Input Method
Auto Enter
Auto Enter character
Display Code Type
Display Code Length
Prefix
Suffix
Field Delimiter
Functions when "auto-discriminate" is applied for UPC/EAN addons.
Decides the number of times of supplemental decoding of the same
barcode in order to count as a valid read.
Users can adjust the illumination brightness of the LED light source.
Sets whether to include AIM code ID character in the decoded data.
Keyboard Emulation setting controls which way the data is sent.
To specify the pause time between data to be transmitted.
The function is only available when "Keyboard Emulation" is set to
be "Input Method".
To add an ENTER character before or after each string of decoded
data. The ENTER character can be defined in the "Auto Enter
character" field below. This function saves the trouble of pressing a
confirmation key to accept each string of decoded data.
To add a key code before or after the decoded data. If [Auto Enter] is
enabled, select the ENTER character to send.
To prefix the output data with code type information.
To suffix the output data with code length information.
To affix 0 to 20 characters to the left of the output data. Click on the
button "Open ASCII Table
entering the prefix.
To affix 0 to 20 characters to the right of the output data. Click on the
button "Open ASCII Table
entering the suffix.
Sets the delimiter to separate the output barcode data as the
following pieces: code type, decoded barcode data, and code length
(if applicable).
Customize Project Configuration
Description
" to open a character table for
" to open a character table for
95
reader
Advertisement
Table of Contents
