CipherLab 9700A User Manual page 94

Android Deployment Configurator User Guide
Make sure to click on "
detail window.
The followings are the brief introduction about the items on the profile detail window. For
completely description for all the setting items, please refer to
Android
.
SCANNER PREFERENCE
Scanner Preferences
Options on the
Item
Decode Timeout
Redundancy Level
Security Level
Inter-Char Gap Size
Scan Mode
Aimer Mode Timeout
Decoding Illumination
Decode Aiming Pattern
Picklist Mode
Display Mode
Inverse Type
Apply
" to save your profile settings before closing this profile
page differ according to the
Sets the maximum time for the decoding process during a scan.
Sets how many successful readings should be done before linear
barcodes such as Codabar, MSI, and Interleaved 2 of 5 can be
decoded.
Sets the security level to ensure decoding accuracy considering the
printed quality of barcodes such as Code 128, Code 93, and UPC/EAN.
The higher the level is, the more security is ensured.
Sets the intercharacter gap size for Code 39 and Codabar. This option
is to allow the digital scanner to adjust its decoding standard so as to
tolerate out-of-specification bar codes that are improperly printed
out (which may cause the intercharacter size to become larger).
Sets the reader's scanning behavior.
A time period that the aiming pattern is projected for Aim Mode.
This function is only available when setting Scan Mode as Aim Mode or
Level and Aim Mode.
Enables an LED light beam to aid barcode reading.
Projects a crosshair at the center of the laser light beam to facilitate
barcode reading.
When selected, only barcodes aligned at the crosshair of the laser
light beam will be decoded.
Enables improved performance for reading barcodes on electronic
displays and mobile phones.
Decides whether to disable or enable decoding inverse barcodes, or
set as auto.
ReaderConfig User Guide for
Description
94
reader module.