Table of Contents
Advertisement
Note:
For IPv4 settings, you can choose for the device to obtain an IP address via DHCP. Your
device IP addresses may be automatically assigned if DHCP is enabled on the adapter.
ADVANCED
Wi-Fi Settings
Unfold "
shown to deliver the following functions:
WLAN PREFERENCES
Item
Network Notification
Keep Wi-Fi on during sleep
CIPHERLAB PROPRIETARY SETTINGS
Item
Wi-Fi Frequency Band
Roaming Enable
Roaming trigger
Roaming delta
Background scan interval
Set Country Code
Advanced
" and click "
Notify when an open network is available.
Set when to turn Wi-Fi on during sleep.
Select Automatic, 5 GHz only, or 2.4 GHz only for your Wi-Fi
frequency band. The default setting is Automatic.
Select whether to enable Wi-Fi roaming or not.
The signal strength when triggering Wi-Fi roaming. The higher value
means the sensitivity of triggering roaming is higher.
The qualification for roam candidates. The higher value means the
signal strength of candidate APs should be higher than the current
connected AP.
The frequency of background scan when the device does not
connect the internet. The shorter time means the scanning
frequency is higher.
Select the country code for your device.
Customize Project Configuration
" option, the advanced Wi-Fi settings page is
Description
Description
125
Advertisement
Table of Contents
