Table of Contents
Advertisement
Type
Host
Port
User
Password
Always remember to click on "
window.
Note:
Emulation Settings involve key mapping with the physical keys of the device, thus the
settings will vary by device model.
Proxy
Proxy allows you to configure CL TE to use various types of proxy
servers in order to make network connections.
The settings affect the primary network connection from your CL TE
SSH session, but also any extra connections made as a result of SSH
port forwarding.
Click the drop-down menu to configure what type of proxy you want
CL TE to use for its network connections. The choices are:
None: no proxy is used.
SOCKS 4 or SOCKS 5: proxy through a SOCKS server.
HTTP: proxy through a web server supporting the HTTP
CONNECT command.
The default setting is None.
Specify the DNS name or IP address of the proxy server. The default
is blank.
Specify the port on which the proxy server is listening. Set this to
match the port on the proxy server for connections.
If your proxy server requires authentication, enter the username.
The default is blank.
If your proxy server requires authentication, enter the password.
The default is blank.
Apply
" before you close the
143
Customize Project Configuration
Configure Device Settings
Advertisement
Table of Contents
