Table of Contents
Advertisement
The Toro Company, 8111 Lyndale Ave. South, Bloomington, MN, USA declares that the following unit(s)
conform(s) to the directives listed, when installed in accordance with the accompanying instructions onto certain
Toro models as indicated on the relevant Declarations of Conformity.
Model No.
Serial No.
—
31527
Relevant technical documentation has been compiled as required per Schedule 10 of S.I. 2008 No. 1597.
We will undertake to transmit, in response to requests by national authorities, relevant information on this partly
completed machinery. The method of transmission shall be electronic transmittal.
This machinery shall not be put into service until incorporated into approved Toro models as indicated on the
associated Declaration of Conformity and in accordance with all instructions, whereby it can be declared in
conformity with all relevant Directives.
This declaration has been issued under the sole responsibility of the manufacturer.
The object of the declaration is in conformity with relevant UK legislation.
Tom Langworthy
Engineering Director
8111 Lyndale Ave. South
Bloomington, MN 55420, USA
October 11, 2022
UK Declaration of Incorporation
Product Description
Flow Divider Kit
Invoice Description
FLOW DIVIDER
KIT-GM45/4700 (YANMAR)
General Description
S.I. 2008 No. 1597
(Machinery Safety),
Flow Divider Kit
S.I. 2016 No. 1091
Authorized Representative:
Marcel Dutrieux
Manager European Product Integrity
Toro U.K. Limited
Spellbrook Lane West
Bishop's Stortford
CM23 4BU
United Kingdom
Regulation
(EMC)
Advertisement
Table of Contents
