Advertisement
Quick Links
Turn Signal Kit
Groundsmaster
with Cab
Model No. 31671
Installation
1
Preparing the Machine
No Parts Required
Procedure
CAUTION
If you leave the key in the ignition switch,
someone could accidently start the engine
and seriously injure you or bystanders.
Remove the key from the ignition switch
before you do any maintenance.
1.
Park the machine on a level surface.
2.
Engage the parking brake.
3.
Shut off the engine and remove the key.
© 2021—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
4010, 4110, 5910, or 360 Series Rotary Mower
Disconnecting the Battery
No Parts Required
Electrical sparks can cause the battery gasses
to explode, resulting in personal injury.
Incorrect battery cable routing could damage
the machine and cables, causing sparks.
• Always disconnect the negative (black)
• Always connect the positive (red) battery
Battery terminals or metal tools could short
against metal components, causing sparks.
• When removing or installing the battery,
• Do not allow metal tools to short between
• Always keep the battery strap in place to
Disconnecting the Battery
Groundsmaster 4010 Series or Groundsmaster
4110 Series Machines
Register at www.Toro.com.
2
WARNING
battery cable before disconnecting the
positive (red) cable.
cable before connecting the negative
(black) cable.
WARNING
do not allow the battery terminals to touch
any metal parts of the machine.
the battery terminals and metal parts of the
machine.
protect and secure the battery.
1.
Open the battery compartment door
Original Instructions (EN)
Printed in the USA
All Rights Reserved
Form No. 3447-728 Rev A
Installation Instructions
(Figure
*3447-728*
1).
Advertisement
Related Manuals for Toro 31671
Summary of Contents for Toro 31671
- Page 1 Form No. 3447-728 Rev A Turn Signal Kit Groundsmaster ® 4010, 4110, 5910, or 360 Series Rotary Mower with Cab Model No. 31671 Installation Instructions Installation Disconnecting the Battery Preparing the Machine No Parts Required WARNING No Parts Required Electrical sparks can cause the battery gasses to explode, resulting in personal injury.
-
Page 2: Disconnecting The Battery
g205862 Figure 1 Disconnect the negative (-) battery cable from g210583 the battery (Figure Figure 3 Open the hood (Figure Rotate the battery disconnect switch to the O position (Figure g205863 Figure 2 g210582 Figure 4 1. Negative battery post 2. - Page 3 Disconnecting the Battery Groundsmaster 360 Series Machines Disconnect the negative (-) battery cable from the battery (Figure g028770 Figure 6 g361658 Figure 5 1. Negative (-) battery cable 2. Right-rear wheel Installing the Warning Lights Parts needed for this procedure: Front light Light gasket Rear light...
- Page 4 Installing the Front Lights Remove the front light covers. Apply the front light gasket to the front warning light (Figure g361614 Figure 7 1. Front light gasket 2. Front warning light Install the front warning lights to the headliner using 4 bolts, 4 washers, and 4 flange nuts (#10) g361771 as shown in Figure...
-
Page 5: Connecting The Battery
Installing the Rear Warning Lights Remove the rear warning light covers. Apply the rear light gasket to the rear warning light (Figure 10). Connecting the Battery No Parts Required Connecting the Battery Groundsmaster 4100 Series Machines Assemble the terminal of the negative battery g361617 Figure 10 cable to the negative post of the battery, and... -
Page 6: Checking The Lights
Perform the following operational checks of the installed lights: Models Headlights Hazard Left-Turn Right-Turn Signal Signal Signal *GM 4010 and 4110 (with (with Series hazard hazard switch switch GM 5910 Models (with (with hazard hazard g210584 switch switch Figure 13 GM 360 1. - Page 7 Notes:...
Need help?
Do you have a question about the 31671 and is the answer not in the manual?
Questions and answers