Table of Contents
Advertisement
Quick Links
Uninterruptible power supply of 4 IP cameras (48VDC)
uninterruptible power supply of the recorder (12VDC)
5 10/100 Mb/s ports
4 PoE ports (data transfer and power supply)
15,4W for each PoE port, supports devices complaint
with the IEEE802.3af standard
Supports auto-learning and auto-aging of MAC
addresses (1K size)
Recorder space
CONTENTS
2.1 Requirements
S54-CRB 5-port switch for 4 IP cameras
in enclosure with recorder space and battery backup
Edition: 1 from 1.05.2016
Supercedes the edition: ---------
Features
:
Example of use .
1
S54-CRB
v1.0
Metal housing - color white RAL 9003, which
can accommodate two 12V/17Ah batteries and
offers the possibility of recorder installation
warranty - 2 year from the production date
PL
EN**
Advertisement
Table of Contents
Related Manuals for Pulsar S54-CRB
Summary of Contents for Pulsar S54-CRB
-
Page 1: Table Of Contents
S54-CRB v1.0 S54-CRB 5-port switch for 4 IP cameras in enclosure with recorder space and battery backup Edition: 1 from 1.05.2016 Supercedes the edition: --------- EN** Features Uninterruptible power supply of 4 IP cameras (48VDC) Metal housing - color white RAL 9003, which ... -
Page 2: Technical Description
(front panel). The S54-CRB is fitted with two LEDs on the front panel (red LED – indicates 230VAC power supply of the PSU, green LED indicates the presence of DC voltage). -
Page 3: Description Of Components And Connectors
1.3 Description of components and connectors. Fig. 2 The enclosure view. Table 1. (See Fig. 2) Component No. Description (Fig. 2) Switch PoE Switch mode buffer power supply unit DC/DC48125 converter DC/DC50SD converter Output filter Tamper – micro switch (terminals) of tamper protection (NC) Space for batteries 12V/2x17Ah Recorder space 380x335x80 (WxHxD) -
Page 4: Technical Parameters
Fig. 3 The view switch'a. Table 2. (See Fig.3) Component No Description (Fig. 3) 4 x PoE port (1÷4) 1 x UPLINK port 48VDC power supply socket 1.4 Technical parameters - parameters of the switch (tab.3) - electrical parameters (tab.4) - mechanical parameters (tab.5) - operation safety (tab.6) - operating parameters (tab.7) -
Page 5: Installation
Table 5. Mechanical parameters Enclosure dimensions 425 x 535 x 180+14 [mm (WxHxD) Fitting battery 2x17Ah/12V (SLA) max. 370 x 180 x 80mm (WxHxD) max 380x335x80 (WxHxD) max Recorder space Gross/Net weight 11,20 / 11,90 kg Enclosure Steel plate, DC01 1,0mm color white RAL 9003 Closing Cheese head screw x 2 (at the front), (lock assembly possible) Power supply of the cameras: RJ45 socket... -
Page 6: Indication Of The Device Operation
4. Connect the ground wire to the terminal marked with the symbol (power supply module connector). Connect the ground wire to the clip marked by the earth symbol PE. Use a three-core cable (with a yellow and green PE protection wire) to make the connection. Lead the cables to the appropriate clips through the insulating bushing of the connection board. -
Page 7: Operation And Use
Installation example of the S54-CRB with batteries and the recorder (DVR and accumulators are not included) 4. Operation and use. 4.1 Overload or short circuit of the PSU output (SCP on). In case of overload, the output voltage is automatically shut off, and so is the LED indicator. The restoration of the voltage takes place immediately after the failure (overload) is over. - Page 8 GENERAL WARRANTY CONDITIONS 1. Pulsar (manufacturer) grants a two-year quality warranty for the equipment, starting from the production date. 2. The warranty includes free-of-charge repair or replacement with an appropriate equivalent (selected by the manufacturer) if the malfunction is due to the manufacturer. It includes manufacturing or material defects, provided that such defects have been reported within the warranty period (point.1).
Need help?
Do you have a question about the S54-CRB and is the answer not in the manual?
Questions and answers