universalblue UAA3000R32-19 Instruction Manual page 58

indoor unit securely to the top of the mounting panel.
• Press and push the bottom of the indoor unit against the mounting panel.
OUTDOOR UNIT INSTALLATION
• Do not install the outdoor unit near sources of heat, steam, or flammable gas.
• Do not install the unit in windy or dusty locations.
• Do not install the unit where people pass often. Select a location where the air
discharge and operating sound will not disturb neighbors.
• Avoid installing the unit where it will be exposed to direct sunlight (otherwise use
protection, if necessary).
• Reserve the spaces as shown in the image to allow air to circulate freely.
• Install the outdoor unit in a safe and solid location.
• If the outdoor unit is subject to vibration, place rubber gaskets on the feet of the
unit. It is recommended to use more screws than usual to avoid vibrations.
• The following procedure should be observed before connecting pipes and
connecting cables: decide which is the best position on the wall and leave
enough space for easy maintenance.
• Fix the bracket to the wall using anchor screws.
• The unit must be installed in accordance with national standards and
regulations.
58