universalblue UAA3000R32-19 Instruction Manual page 55

Mounting Panel Installation
• Always mount the rear panel horizontally and vertically
• Drill a hole 32 mm deep to fix the panel.
• Insert the plastic anchors into the hole;
• Fasten the rear panel to the wall with the supplied threaded screws.
• Make sure the rear panel is secured enough to support the weight of the applato.
Note: the shape of the mounting panel may differ from the image in the manual but the
installation method will be similar in any case.
Pipe Installation
• Drill the pipe hole in the wall with a slight tilt to the outside.
• Insert the pipe sleeve into the orifice to prevent damage to the connecting pipe
and turning when passing through the hole.
Note: Keep the pipe in the direction of the hole to avoid gas leaks.
Indoor Unit Connections
55