universalblue UAA3000R32-19 Instruction Manual page 50

In this mode, the automatic cycles of cooling and ventilation are alternated.
FEEL MODE
To activate the FEEL operating mode, press
the MODE button on the remote control until
the corresponding symbol or word FEEL
appears on the display.
In FEEL mode the fan speed and temperature
are automatically set according to the
ambient temperature, which is measured
through a temperature sensor built into the
indoor unit.
ROOM OPERATING
TEMPERATURE MODE
≤ 20º HEAT
20TH - 26TH DEHUMIDIFIER 18º
≥ 26º COLD
To optimize the operation of the air conditioning, adjust the temperature (only ± 2 Cº),
speed and direction of air flow by pressing the indicated buttons.
NIGHT MODE
To activate the SLEEP mode, press the SLEEP
button on the remote control until the
function symbol appears on the screen.
SLEEP mode automatically
temperature to
comfortable during sleeping hours. In cold or
humidifier, the
AUTOMATIC
TEMPERATURE
23º
23º
adjusts
make the room
set temperature
the
more
will
50