Carrying Handle; Spindle Lock Button; Lock-Off Lever; Trigger Lock - Craftsman 315.2121O0 Owner's Manual

CARRYING
HANDLE
Sea Figure 4.
For conveniencewhen carryingor transportingyour
miter saw from one place to another, a carrying
handle has been provided on top of the saw arm as
shown in figure 4. To transport, turn off and unplug
your saw, then lower the saw arm and lock it in the
downposition.Lock saw arm by depressingthe lock
pin.
CARRYING
HANDLE
LOCK
PIN
SAW
ARM
MITER LOCK
HANDLE
SAWARM
LOCKED IN DOWN POSITION
Fig. 4
MITER LOCK HANDLE
Sea Figure 4.
The!miter lock handle securely locksyour saw at
desired miter angles.
LOCK-OFF LEVER
See Figure 5.
The switch tdggar is equipped with a lock-offlever to
reduce the possibilityof accidental starting.The lock-
off lever must be pressed down with the palm of your
hand to tum saw on. Once the saw is on, the lock-off
lever can be released, The spdng loaded lever will
spdng back intothe lock-offpositionwhen the switch
tdgger is released.
11
SPINDLE LOCK BUTTON
See Figure 5.
A spindle lock button has been providedfor locking
the spindle which stops the rotationof the blade in
your saw. Depress and hold the lock buttonwhile
installing,changing, or removingblade.
LOCK-OFF
SPINDLE
LOCKBuI"rON
SWITCH,
TRIGGER
Rg. L
TRIGGER LOCK
See Figure 6.
To prevent unauthodzed usa of your compound miter
saw, we suggest that you disconnectit from the power
supply and lock the switchin the off position.To lock
the switch, install a padlock throughthe hole in the
switch tdggar. A lock with a shackle up to 13/64 in.
diameter may be used. When the lock is installedand
locked, the switch is inoperable. Store the padlock key
in another location.
SWITCH
TRIGGER
Fig. 6