Product Specifications; Unpacking - Craftsman 315.2121O0 Owner's Manual

Blade Diameter 10in.
Blade Arbor 5/8in.
NoLoad Speed 5000 RPM
Rating 120Volts, 6 0Hz-AC Only
Input 15Amperes
NetWeight 32Ibs.
Cutting Capacity withMiter at0°/Bevel 0°:
5-3/4in.Wx 2-5/8 in.T
Maximum C utting Capacity withMiter a t45°/Bevel 0°:
4-1/4in.Wx 2-5/8 in.T
Maximum C utting Capacity withMiter a t0°/Bevel 45°:
5-3/4in.Wx1-7/8 in.T
Maximum C utting C apacity withMiter a t45°/Bevel 45°:
4-1/4in.Wx 1-7/8 in.T
Your C ompound Miter S awhasbeen shipped
completely
assembled except for the blade, miter lock
handle, and dust guide.
_lb WARNING: If any parts are missing,do not
operate this tool until the missingparts are
replaced. Failure to do so could result in possible
serious porsonal injury.
• Remove all loose parts from the carton. Separate
and checkwith the list of loose parts. See Rgure 2.
• Remove the packing materialsfrom around your
saw.
• Carefully lift saw from the carton and place it on a
level work surface. Althoughsmall, this sew is
heavy. To avoid back injury,get help when
needed.
Do not discard the packing materials untilyou
have carefully inspectedthe saw, identifiedall
loose parts, and setisfa_odly operated your new
saw.
• Your saw has been shippedwith the saw arm
locked in the down position. To release sew arm,
push down on top of saw arm and pullout the lock
pin. See Figure 4.
• Lift the saw arm by the handle. Hand pressure
shouldremain on the sew arm to prevent sudden
rise upon release of the lock pin.
• Examine all parts to make sure no breakage or
damage has occurreddudng shipping.
If any parts are damaged or missing,do not attempt to
plug in the power cord and turn the switchon untilthe
damaged or missingparts are obtained and are
installedcorrectly.