Carrying Handle; Miter Lock Handle; Spindle Lock Button; Trigger Lock - Craftsman 315.212240 Operator's Manual

CARRYINGHANDLE
See Figure 4.
For convenience when carrying or transporting your
miter saw from one place to another, a carrying
handle has been provided on top of the saw arm as
shown in figure 4. To transport, turn off and unplug
your saw, then lower the saw arm and lock it in the
down position. Lock saw arm by depressing the lock
pin.
CARRYING
HANDLE
SAW
ARM
LOCKPIN _)
MITERLOCK
HANDLE SAW ARM
LOCKEDIN DOWNPOSITION
Fig. 4
MITER LOCK HANDLE
See Figure 4.
The miter lock handle securely locks your saw at
desired miter angles.
SPINDLE LOCK BUTTON
See Figure 5.
A spindle lock button has been provided for locking
the spindle which keeps the blade in your saw from
rotating. Depress and hold the lock button while
installing, changing, or removing blade only.
SWITCHTRIGGER
SPINDLE
LOCKBUTrON
Fig. 5
TRIGGER LOCK
See Figure 6.
To prevent unauthorized use of your compound miter
saw, we suggest that you disconnect it from the power
supply and lock the switch in the off position. To lock
the switch, install a padlock through the hole in the
switch trigger. A lock with a long shackle up to 13/64
in. diameter may be used. When the lock is installed
and locked, the switch is inoperable. Store the pad-
lock key in another location.
SWITCH
TRIG(;
PADLOCK
Fig. 6
12