7.2.4 To install the outdoor unit
EWAA004~008D + EWYA004~008D
Packaged air-cooled water chillers
and packaged air to water heat pumps
4P688013-1B – 2022.09
Option 2: On plastic mounting feet
In this case, you can use the bolts, nuts, washers and spring washers delivered with
the unit as accessories.
0 mm
CAUTION
To avoid injury, do NOT touch the air inlet or aluminium fins of the unit.
CAUTION
Do NOT remove the protective cardboard before the unit is installed properly.
1 Carry the unit using the slings attached to the unit. Pull up both sides of the
sling at the same time to prevent disconnection of the sling from the unit.
2 While handling the unit:
7
2
2
Unit installation
|
Installer reference guide
53