Daikin EWYA004D2V3P Installer's Reference Manual page 177

Forced defrost
Overview field settings
Export MMI settings
EWAA004~008D + EWYA004~008D
Packaged air-cooled water chillers
and packaged air to water heat pumps
4P688013-1B – 2022.09
To enable the power saving function setting, [E‑08] needs to be enabled on the
user interface.
# Code
[9.F] [E‑08]
Forced defrost
Manually start a defrost operation.
# Code
[9.H] N/A
NOTICE
Forced defrost start-up. You can only start forced defrost when the heating
operation has been running for a while.
Almost all settings can be done using the menu structure. If for any reason it is
required to change a setting using the overview settings, then the overview
settings can be accessed in the field settings overview [9.I]. See
4
overview setting" [ 105].
About exporting the configuration settings
# Code
[9.N] N/A
To export MMI settings
1 Insert a USB memory stick in the user interface.
2 On the user interface, go to [9.N] Export MMI settings.
3 Select OK.
Description
Power saving function for compressor
module:
▪ 0: No
▪ 1: Yes
Description
Do you want to start a defrost operation?
▪ Back
▪ OK
Description
Your MMI settings will be exported
to the connected storage device:
▪ Back
▪ OK
11 Configuration
|
"To modify an
—
Installer reference guide
177