Download Print this page
Aqua Creek Products Ambassador F-PPXRD-R-04 Manual

Aqua Creek Products Ambassador F-PPXRD-R-04 Manual

Reverse pool lift

Advertisement

Quick Links

Check entire box and all packing materials for parts. Before beginning assembly, read the
instructions and identify parts using the fi gures and parts listed in this document.
It is critical that all parts be carefully inspected prior to installation. If any damage occurred in
transit, Aqua Creek Products, LLC must be notifi ed within three days of receipt of unit.
Proper installation cannot be overstressed, as an improper installation voids Aqua Creek's
warranty and may aff ect the safety of the user.
Copyright © 2021 Aqua Creek Products All Rights Reserved
Ambassador Reverse
US PATENT NUMBER: [D507,769 S] [7,249,386 B2]
300 LB. [136 kg] MAXIMUM WEIGHT CAPACITY
Lift safety can only be ensured if the lift is installed and
• NEVER permit children to play on or around the lift
• Do not allow children to use the lift without adult
supervision
• NEVER apply direct water pressure to the electronics
• NEVER use the lift with a dry pool
ADA COMPLIANT
READ CAREFULLY
Pool Lift
PART #: F-PPXRD-R-04
MANDATORY
LEAVE THIS MANUAL WITH LIFT OWNER
Read and follow all instructions.
operated according to these instructions.
1
Revised 5/27/21

Advertisement

loading
Need help?

Need help?

Do you have a question about the Ambassador F-PPXRD-R-04 and is the answer not in the manual?

Questions and answers

Summary of Contents for Aqua Creek Products Ambassador F-PPXRD-R-04

  • Page 1 It is critical that all parts be carefully inspected prior to installation. If any damage occurred in transit, Aqua Creek Products, LLC must be notifi ed within three days of receipt of unit. Proper installation cannot be overstressed, as an improper installation voids Aqua Creek’s warranty and may aff...
  • Page 2: Table Of Contents

    1. AMBASSADOR REVERSE MAIN ASSEMBLY 2. 24V LINAK BATTERY 3. LINAK BATTERY CHARGER 4. LINAK HANDSET 5. SAFETY BELT 6. ANCHOR JIG PLATE & HARDWARE (IF ORDERED WITH ANCHOR) Copyright © 2021 Aqua Creek Products All Rights Reserved Revised 5/27/21...
  • Page 3 12" 62" CHAIR C L 2 " 16" (ADA REQ'D MIN) DECK *NOTE: 22 1/2" IS THE POOL WALL MINIMUM SETBACK. 38" IS THE MAXIMUM FIGURE 1 LIFT SETBACK. Copyright © 2021 Aqua Creek Products All Rights Reserved Revised 5/27/21...
  • Page 4: Anchor Installation: Core-Drill Retro-Fit

    NOTE: We recommend using masking tape around the holes on the bottom of the anchor jig plate to help prevent the anchor plate from being accidentally epoxied to the pool deck. Copyright © 2021 Aqua Creek Products All Rights Reserved Revised 5/27/21...
  • Page 5 OBSTRUCTION) LIFT OUTLINE USE JIG-PLATE (LARGER HOLES) USE JIG-PLATE TO MARK LOCATIONS ASSEMBLY FOR TEST-FITTING AND TO HOLD ANCHORS IN PLACE AS EPOXY CURES FIGURE 3 Copyright © 2021 Aqua Creek Products All Rights Reserved Revised 5/27/21...
  • Page 6: Anchor Installation: Saw-Cut Retro-Fit

    10. Once the concrete has cured, the lift is ready *SETBACK DIMENSIONS ARE FOR FLAT DECK APPLICATIONS. FOR SLOPED DECKS OR OTHER FEATURES, CONTACT AQUA CREEK BEFORE INSTALLATION. to be mounted to the anchoring system. FIGURE 5 Copyright © 2021 Aqua Creek Products All Rights Reserved Revised 5/27/21...
  • Page 7 680.26) SEE FIGURE 5, PAGE 6 6. Pour your concrete and fi nish the pool deck surface. 7. Once the concrete has cured the lift is ready to be mounted to the anchoring system. Copyright © 2021 Aqua Creek Products All Rights Reserved Revised 5/27/21...
  • Page 8 “break in” POOL cycle period. WALL ANCHORS (3) INSTALLED FLUSH W/DECK SURFACE WHEN NOT IN USE, STORE THE BATTERY ON THE CHARGER! FIGURE 8 Copyright © 2021 Aqua Creek Products All Rights Reserved Revised 5/27/21...
  • Page 9 2. Using the supplied 1/4” hardware, fasten the legrest assembly to the 2 x 2 tubing. LEGREST ASSEMBLY 1/4" FLAT WASHER 1/4" LOCK WASHER 1/4" X 3/4" THUMB SCREW LEGREST IN LEGREST OUT Copyright © 2021 Aqua Creek Products All Rights Reserved Revised 5/27/21...
  • Page 10: Basic Troubleshooting

    Note: the lift will not retract if the battery is not fully charged or if the control box is not working. The emergency button only overrides the remote handset. Copyright © 2021 Aqua Creek Products All Rights Reserved Revised 5/27/21...
  • Page 11: Pinch Point Locations

    Pinch Point Locations CAUTION! PINCH POINT AREA! Copyright © 2021 Aqua Creek Products All Rights Reserved Revised 5/27/21...
  • Page 12: Proper Care Of Pool & Spa Lifts

    3M Scotch Brite™ pad. Use white epoxy paint to touch up the finish. Apply wax to protect when dry. For service and/or replacement parts, contact Aqua Creek Products Toll free: (888) 687-3552 Copyright © 2021 Aqua Creek Products All Rights Reserved...
  • Page 13 5/16”-18 F-45ACB-C RESISTANT BOLT, 18-8 SS, 3/8 X 1 BOLT, 316 SS, 1/2” X 1 3/4” BS 3/8 X 1-3/4 18-8 3/4 SHOULDER, 5/16- PPB-CCB-10 FHSCS, CUSTOM 18 THREAD Copyright © 2021 Aqua Creek Products All Rights Reserved Revised 5/27/21...
  • Page 14 SHALL AQUA CREEK’S LIABILITY EXCEED THE ENTIRE AMOUNT PAID TO AQUA CREEK BY THE ORIGINAL PURCHASER FOR THE FAILED OR DEFECTIVE PRODUCT. IN NO EVENT SHALL AQUA CREEK PRODUCTS, LLC BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL, INDIRECT, PUNITIVE OR EXEMPLARY DAMAGES OR LOST PROFITS FROM ANY BREACH OF THIS LIMITED WARRANTY OR OTHERWISE.
  • Page 15 Immedia ately remove e from servic ce any lift th hat does not  have 100%  compliance  with the ins spection    until the  appropriate e corrections s have been  made by a q qualified pe rson.   Page 1 of 4 4    Copyright © 2021 Aqua Creek Products All Rights Reserved Revised 5/27/21...
  • Page 16 .    . Inspect li ift slings, sea at belts, and  other simila ar stitched a and webbed  or weaved        materials s for damage e, fatigue, an nd/or deteri ioration.  Re place at first t sign of any y  fatigue o or damage.    TES/RECOMM MENDATION NS:  4  Page 2 of 4 Copyright © 2021 Aqua Creek Products All Rights Reserved Revised 5/27/21  ...
  • Page 17 Once the e battery is f ully charged d up to 24 to o 28 volts, cy ycle the lift (u up, down,  rotate) co ounting the  cycles.  If th he battery is  in good con ndition, the l ift should  easily co mplete at le ast 15 cycle s without a  load.  TES/RECOMM MENDATION NS:  Page 3 of 4 Copyright © 2021 Aqua Creek Products All Rights Reserved Revised 5/27/21...
  • Page 18 Verify th e lift was ins stalled corre ectly; is the li ift free to tra avel in and o out of the  pool with hout hitting  anything lik e a wall, rail , bench, etc ..  c. Rotate lif ft at least 90 0 degrees ov ver the wate r and back a again if appli cable  TES/RECOMM MENDATION NS  Page 4 of 4 Copyright © 2021 Aqua Creek Products All Rights Reserved Revised 5/27/21...