Download Print this page
Aqua Creek Products Patriot-AT2 Manual

Aqua Creek Products Patriot-AT2 Manual

Portable lift

Advertisement

Quick Links

9889 Garrymore Ln
Missoula, MT 59808
888-687-3552 | +1-406-549-0769
www.aquacreek.com
Check entire box and inside all packing materials for parts. Before beginning assembly, read the
instructions and identify parts using the fi gures and parts listed in this document.
It is critical all parts be carefully inspected by the installer prior to installation to ensure no damage
occurred in transit and a damaged part is not used. If any damage occurred in transit, Aqua Creek
Products, LLC must be notifi ed within three days of receipt of unit.
Proper installation cannot be overstressed, as an improper installation voids Aqua Creek's warranty
and may affect the safety of the user.
Copyright © 2019 Aqua Creek Products All Rights Reserved
ADA COMPLIANT
READ CAREFULLY
Patriot-AT2
Portable Lift
PART #: F-12PPL-HD-AT2-05
US PATENT NUMBER: [D507,769 S] [7,249,386 B2]
375 LB. [170 kg] MAXIMUM WEIGHT CAPACITY
MANDATORY
LEAVE THIS MANUAL WITH LIFT OWNER
Read and follow all instructions.
Lift safety can only be ensured if the lift is installed and
operated according to these instructions.
• NEVER permit children to play on or around the lift
• Do not allow children to use the lift without adult
supervision
• NEVER apply direct water pressure to the electronics
• Do not use the Patriot-AT2 for deck-to-waterline
measurements over 12"
• NEVER operate lift without all ten weight plates
installed on the lift
• NEVER use the lift with a dry pool
• For safety reasons, NEVER swim alone
1
Revised 6/18/19

Advertisement

loading
Need help?

Need help?

Do you have a question about the Patriot-AT2 and is the answer not in the manual?

Questions and answers

Summary of Contents for Aqua Creek Products Patriot-AT2

  • Page 1 • Do not allow children to use the lift without adult supervision • NEVER apply direct water pressure to the electronics • Do not use the Patriot-AT2 for deck-to-waterline measurements over 12” • NEVER operate lift without all ten weight plates installed on the lift •...
  • Page 2: Table Of Contents

    6. PVC INSERT 7. 4 1/2” HEX BOLT 8. 1/2” FLAT WASHER 9. *WEIGHT PLATES (10) 10. *HARDWARE PACKAGE 11. *ADA LIFT SIGN FIXING ITEMS 12. *LUBRICANT PACKET *ITEMS NOT SHOWN Copyright © 2019 Aqua Creek Products All Rights Reserved Revised 6/18/19...
  • Page 3 Installation: ADA Guidelines ADA REQUIREMENTS: The Patriot-AT2 Lift is completely ADA Compliant when installed correctly. The installation must meet the following requirements: • Clear Deck Space Dimensions (see FIGURE 1) • Centerline of seat between 16 inches and 22 inches from the pool edge •...
  • Page 4: Patriot-At2 Lift Assembly Instructions

    There should be no gap LOOP ON TOP FOR EASY ACCESS between the battery and control box. See diagram below. BATTERY CONTROL BOX THREAD THROUGH SLOTS AND PINCH TOGETHER TO HOLD Copyright © 2019 Aqua Creek Products All Rights Reserved Revised 6/18/19...
  • Page 5 2. Using the supplied 1/4” hardware, fasten the legrest assembly to the 2 x 2 tubing using a 5/32” allen wrench. FOOTREST ASSEMBLY 1/4" FLAT WASHER 1/4" LOCK WASHER 1/4" X 1/2" BUTTON-HEAD FOOTREST IN FOOTREST OUT Copyright © 2019 Aqua Creek Products All Rights Reserved Revised 6/18/19...
  • Page 6 If needed, adjust the alignment of the lift. When properly aligned, complete threading with a 3/4 inch wrench or socket. Tighten until the bolt just touches the flat washer. DO NOT OVERTIGHTEN. Copyright © 2019 Aqua Creek Products All Rights Reserved Revised 6/18/19...
  • Page 7 Rotate the lift forward and down until it rests fl at on the deck. Turn the handle of the brake-foot clockwise until the brake-foot is fi rmly in contact with the deck. The lift is now ready to use. Video available at aquacreekproducts.com/patriot Copyright © 2019 Aqua Creek Products All Rights Reserved Revised 6/18/19...
  • Page 8 Rotate the brake-foot handle counter-clockwise and raise it off the deck. Remove the fi xing bolt (if applicable) and unlock the casters. The lift is now ready to move. Copyright © 2019 Aqua Creek Products All Rights Reserved Revised 6/18/19...
  • Page 9: Basic Troubleshooting

    Note: the lift will not retract if the battery is not fully charged or if the control box is not working. The emergency but- ton only overrides the remote handset. Copyright © 2019 Aqua Creek Products All Rights Reserved Revised 6/18/19...
  • Page 10: Pinch Point Locations

    Pinch Point Locations CAUTION! PINCH POINT AREA! PORTABLE CART NOT SHOWN FOR CLARITY Copyright © 2019 Aqua Creek Products All Rights Reserved Revised 6/18/19...
  • Page 11: Proper Care Of Pool & Spa Lifts

    3M Scotch Brite™ pad. Use white epoxy paint to touch up the finish. Apply wax to protect when dry. For service and/or replacement parts, contact Aqua Creek Products Toll free: (888) 687-3552 Copyright © 2019 Aqua Creek Products All Rights Reserved...
  • Page 12: Patriot-At2 Parts List

    5/16” X 4 1/2” SNAP PIN BRONZE WF 5/16 5/16” FLAT WASHER 1/2” X 5/8” X 3/8” X 1/8” BRONZE BRB FL-50-3 FLANGE BUSHING NN 5/16 5/16”-18 NYLOCK NUT Copyright © 2019 Aqua Creek Products All Rights Reserved Revised 6/18/19...
  • Page 13 BOLT, 316 SS, 1/4-20 X 3/8 HWH SQR-1-14-20 CAP, PLASTIC, 1”X1” SQUARE BH 1/4 X 3 BOLT, 316 SS, 1/4-20 X 3 HCS WFE 1/4 WASHER, FENDER, 316 SS, 1/4 X 1 Copyright © 2019 Aqua Creek Products All Rights Reserved Revised 6/18/19...
  • Page 14 SHALL AQUA CREEK’S LIABILITY EXCEED THE ENTIRE AMOUNT PAID TO AQUA CREEK BY THE ORIGINAL PURCHASER FOR THE FAILED OR DEFECTIVE PRODUCT. IN NO EVENT SHALL AQUA CREEK PRODUCTS, LLC BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL, INDIRECT, PUNITIVE OR EXEMPLARY DAMAGES OR LOST PROFITS FROM ANY BREACH OF THIS LIMITED WARRANTY OR OTHERWISE.

This manual is also suitable for:

F-12ppl-hd-at2-05