Specifications; Analog Input; Analog Output - National Instruments NI-9203 User Manual And Specifications

Specifications

Analog Input

Analog Output

1
Performance dependent on type of installed C Series I/O modules and number of channels in the task.
2
Does not include group delay. Refer to C Series I/O module documentation for more information.
© National Instruments Corporation
These specifications are for the NI cDAQ-9172 chassis only. These
specifications are typical at 25 °C unless otherwise noted. For the C Series
I/O module specifications, refer to the documentation for the C Series I/O
modules you are using.
Input FIFO size ...................................... 2,047 samples
1
Sample rate
Maximum........................................ 3.2 MS/s
Minimum ........................................ 0 S/s
2
Timing accuracy ................................... 50 ppm of sample rate
2
Timing resolution ................................. 50 ns
Number of channels supported .............. Determined by the C Series
Numbers of channels supported
In hardware-timed task ................... 16
In non-hardware-timed task ............ Determined by the C Series
Maximum update rate ............................ 1.6 MS/s
Timing accuracy..................................... 50 ppm of sample rate
Timing resolution ................................... 50 ns
Output FIFO size.................................... 8,191 samples shared among
(multi-channel, aggregate)
I/O modules
I/O modules
(multi-channel, aggregate)
channels used
77 NI cDAQ-9172 User Guide and Specifications