Specifications - National Instruments FieldPoint FP-3000 Operating Instructions Manual

Specifications

FP-3000............................................. FOUNDATION Fieldbus H1
Integrity............................................. Checksum
Power Supply Range......................... 11 to 30 VDC
Maximum Terminal Bases/Bank ...... 9
Maximum Banks/Fieldbus
Segment (without repeaters) ............. 32
Power Consumption.......................... 6 W + 1.15
Operating Temperature ..................... –40° C to +60° C
Storage Temperature ......................... –55° C to +100° C
Relative Humidity............................. 5% to 90% non-condensing
CE Mark Compliance
This product meets applicable EU directive(s) as follows:
EMC Directive
Immunity .................................... EN 50082-1:1994
Emissions .................................. EN 55011:1991 Group I
Mechanical Dimensions
Figure 6 shows the mechanical dimensions of the FP-3000.
4.31
[109.5]
3.58 [90.9]
Operating Instructions
Figure 6. Mechanical Dimensions
consumption
Class A at 10 meters
6
* ∑
(I/O module
)
4.19 [106.4]
© National Instruments Corp.