Checking Reminder Notifications; Other Settings; Changing The Date Display Format; Specifying The Day Of The Week Language - Casio 3541 Operation Manual

Checking Reminder
Notifications
[REM] flashes on the display during a day
when there is an anniversary or event that was
created with the CASIO WATCHES phone
app. Pressing (A) will display the title assigned
to the reminder.
After the title is displayed once, the date of the
reminder will appear with the dot between the
month and day flashing. Pressing (A) while the
dot is flashing will display the title again.
Note
If you turn on display illumination on a
●
reminder date, the display light will
flash red for a few seconds after
illumination automatically turns off.
Watch Operation Guide 3541

Other Settings

This section explains other watch settings you
can configure.
Changing the Date Display
Format
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
3.
Press (C) nine times.
This displays a screen for selecting the
date display format.
4.
Press (D) to select a date display format.
[M.DD]: Month, day
[DD.M]: Day, month
5.
Press (A) to exit the setting screen.
Note
While the setting is being configured,
●
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Specifying the Day of the
Week Language
You can select any one of six languages for
the day of the week display in the Timekeeping
Mode.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
Home City
3.
Press (C) 10 times.
This causes the language setting to flash.
4.
Use (D) to select a language.
[ENG]: English
[ESP]: Spanish
[FRA]: French
[DEU]: German
[ITA]: Italian
[PyC]: Russian
5.
Press (A) to exit the setting screen.
Note
While the setting is being configured,
●
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Home City
25