Measuring A Split Time; Timing The First And Second Place Finishers; Using Casio Watches To Configure Timer Settings; Setting The Countdown Start Time - Casio 3541 Operation Manual

Measuring a Split Time

1.
Enter the Stopwatch Mode.
Navigating Between Modes
l
2.
Use the operations below to measure
elapsed time.
Pressing (A) displays the elapsed time
●
from the start of a race up to the point
when you pressed the button (split
time).
D
Start
A
Split
A
Split release
D
Stop
Elapsed time is shown in 1/100-second
●
units for the first hour of the
measurement. After the first hour,
elapsed time is shown in one-second
units.
First hour After first hour
Minutes, seconds, Hour, minute, second
1/100 seconds
3.
Press (A) to reset the measurement time
to all zeros.
Watch Operation Guide 3541
Timing the First and Second
Place Finishers
1.
Enter the Stopwatch Mode.
Navigating Between Modes
l
2.
Use the operations below to measure
elapsed time.
* This displays the time of the first
finisher.
Elapsed time is shown in 1/100-second
●
units for the first hour of the
measurement. After the first hour,
elapsed time is shown in one-second
units.
First hour
Minutes, seconds,
1/100 seconds
3.
Press (A) to display the time of the second
finisher.
4.
Press (A) to reset the measurement time
to all zeros.
D
Start
A
1st Finisher*
D
2nd Finisher*
After first hour
Hour, minute, second
Timer
The timer counts down from a start time
specified by you. A beeper sounds when the
end of the countdown is reached.
The beeper is muted when battery power is
●
low.
Using CASIO WATCHES to
Configure Timer Settings
If the watch is paired with a phone, you can
also use the CASIO WATCHES phone app to
set the timer start time.
Configuring Watch Settings
l
Setting the Countdown Start
Time
The countdown start time can be set in 1-
second units up to 24 hours.
If a timer countdown operation is in
●
progress, reset the timer to its current start
time before performing this operation.
Using the Timer
l
1.
Enter the Timer Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
This causes the hours digits to flash.
Hours
3.
Use (B) and (D) to change the timer hours
setting.
Holding down (B) or (D) scrolls through
●
settings at high speed.
23