Operation
Cab heating (optional)
Heating control knob
The temperature is set with the
1
2
controller (Fig. 13/1).
Setting warmer: Turn the controller
clockwise
Setting colder: Turn the controller
counter-clockwise
Switch for heating blower
The heating blower is switched on with
the switch (Fig. 13/2).
I = slow stage
II = fast stage
Adjusting the air vents
There is one air vent ((Fig. 13/3) each
on the right and left at the underside of
the roof lining. The nozzles can be
turned and the flaps adjusted. When the
heating is switched off, the blower can
also be used to ventilate the cab.
3
3
Fig. 25
42