Table of Contents
Advertisement
Operation
Cab (optional)
Swinging the cab up
The cab can be swung up for mainte-
nance work. Please follow the order
described below, since otherwise the
cab or machine may be damaged.
1. Switch the engine off and close the
cab door.
2. Open the side flap and fit the pump
lever onto the hand pump (Fig. 11/1).
3. Set the control lever (Fig. 11/2) on
the pump to "raise" (arrow upwards)
and pump the cab up with the pump
lever until it moves no further.
4. Pull off the pump lever, place it in the
holder and close the side flap again.
40
1
2
Fig. 23
Advertisement
Table of Contents
