Removal Procedure - Omron NSA Series User Manual

3-4 Starting the Industrial PC and Procedure after Power Interruption

3-4-4 Removal Procedure

1. Loosen the thumbscrew on the memory card cover, rotate the cover up to the
Install/Remove position, and secure the cover in place.
2. Press the Eject Button. Use your middle finger to press the Eject Button and
place your index finger in front of the memory card to keep it from popping out
and falling on the floor.
•
Note
•
Use only a CF Card that has the CE Marking.
Thoroughly test the memory card that will be used to confirm that it operates
properly before actually using it with the product. Some memory cards may not
be compatible. Also, use a memory card with an ambient operating
temperature range between –5 and 85°C.
3-4-4 Removal Procedure
3-17
3