Omron NSA Series User Manual page 16

35. The backlight in the NSA-series Industrial PC cannot be replaced by the user.
36. If there is a chance that the NSA-series Industrial PC may come into contact
37. The NSA-Series Industrial PC uses an analog touch panel. The positions of
38. Waterproof and oil-proof performance may be lost if the front sheet is peeling
39. Depending on the application environment, the rubber packing may deteriorate,
40. Thoroughly test any application programs created by users or third-party
41. Windows XP Embedded is an OS designed for embedded use. Some
42. Do not use the NSA-Series Industrial PC in locations that are subject to oil.
43. Do not place the Battery into a fire or heat the Battery.
xvi
Contact your OMRON representative to replace the backlight.
with water, inspect the installation periodically.
touch switches may change with time. If the touch switches are too far out of
position, calibrate them.
or cracked. Do not use the NSA-Series Industrial PC if the front sheet is peeling
or cracked.
shrink, or harden. Inspect and replace it periodically.
vendors to confirm that they operate properly before actually using them on the
NSA-Series Industrial PC. OMRON cannot assume any responsibility for
programs created by any party other than OMRON, nor for the results of using
such programs.
application programs that operate on the Windows XP Professional OS may
not operate on the Windows XP Embedded OS of an NSA-series Industrial PC.