Appendix 2-3 Enabling The Ewf Function; Appendix 2-4 Updating Data On The Dom When The Ewf Function; Is Enabled - Omron NSA Series User Manual

Appendix 2 Using the Enhanced Write Filter

Appendix 2-3 Enabling the EWF Function

Appendix 2-3 Enabling the EWF Function
Appendix 2-4
Appendix
Appendix-22
Display the command prompt screen, then input the following command to enable
the EWF function. After the Unit is normally restarted, the data on the DOM will not
be directly written, but will be emulated on the main memory.
Command: ewfmgr c: -enable
Execution example
Updating Data on the DOM When the EWF Function Is
Enabled
Display the command prompt screen, then input the following command to update
the data on the DOM even when the EWF function is enabled. The next time that
the Unit is normally restarted or shut down, the data that was emulated on the main
memory will be reflected on the DOM.
Command: ewfmgr c: - commit
Execution example