Switching the Broadcast Mode
1
Press the FAR/NEAR button on the Remote Commander.
The Display Control menu appears.
2
Use the V, v, B or b button on the Remote Commander to select
"Broadcast Mode", then press the PUSH ENTER button.
Display Control
Display
3
Use the V or v button on the Remote Commander to select either of the
following options, then press the PUSH ENTER button.
Self Broadcast: Broadcasts the near end (local) party in the Broadcast
mode.
Stop Broadcast: Stops broadcasting in the Broadcast Mode.
Connecting Other Sony Video Communication System With the MCU Software Installed
Control
Near
Far
Camera
Broadcast Mode
Self
Broadcast
141