Sony PCS-11 Operating Instructions Manual page 155

3
Select "Phone Book" or "Dial" using the V, v, B or b button on the Remote
Commander, according to the registration of the remote party to whom you
want to transfer the call, then press the PUSH ENTER button.
4
Select the remote party from the Phone Book or by using the Dial menu,
then select "Dial".
For details, see steps 2 and 3 in "To call a remote party registered in the
Phone Book"(page 151) or steps 2 to 4 in "To call a remote party not
registered in the Phone Book"(page 151).
Note
You can transfer a call to the remote parties with "Line I/F" set to "SIP" only.
When the system connects to the selected remote party, the picture of the
remote site and the message "Call will be transferred upon disconnection"
appear on the monitor screen.
5
When the remote party answers, inform that party that you are transferring
a call, and then press the CONNECT/DISCONNECT (
the Remote Commander.
Call is transferred and the launcher menu is restored on the monitor screen of
the local system.
To cancel call transfer
Select "Cancel" from the submenu and press the PUSH ENTER button on the
Remote Commander.
Note
You can cancel call transfer only before the destination remote party answers. To cancel
call transfer after the destination remote party has answered, ask the remote party to
disconnect the line.
Starting a Videoconference Using SIP
/ ) button on
155