Sony PCS-11 Operating Instructions Manual page 42

Off: Does not display the elapsed time.
Note
During communication, some items are not
displayed.
Page 2/4
General Setup
Page: 2/4
MM/DD/YYYY
Clock Set
01/01/2004
Last Number Registration
T.120 PC Address
Clock Set
Enter the current date and time.
Note
The clock will be reset to the factory setting
when the Communication Terminal is turned
off. Set the date and time again.
Last Number Registration
Selects whether or not to register the remote
party in the Phone Book after the conference
has finished.
On: If the remote party has not yet been
registered in the Phone Book, the
message "Register this participant in the
list?" appears on the monitor screen after
the conference has finished. When you
select "OK", the List Edit menu opens.
Off: The above message does not appear.
T.120 PC Address
When conducting a data conference based
on the T.120 standard using NetMeeting,
input the IP address of the computer (for the
ISDN connection).
For details on a data conference based on
the T.120 standard, see "Conducting a Data
Conference Using NetMeeting – T.120 Data
Conference" on page 131.
42
Registering Local Information
HH:MM:SS
00:00:00
On
. . .
Save Cancel
Page 3/4
General Setup
Page: 3/4
Language
IR Repeater Mode
Control by Far End
Character Input Help
Memory Stick Format
Language
Selects the language used for messages or
menus.
You can select among from 17 languages;
English, French, German, Japanese,
Spanish, Italian, Simplified Chinese,
Portuguese, Traditional Chinese, Korean,
Dutch, Swedish, Danish, Finnish, Polish,
Russian, Arabic.
IR Repeater Mode
Selects the remote control mode of the IR
repeater.
MODE 1: (For customers who are using the
PCS-11 Video Communication System
only)
Normally, select this mode.
MODE 2: (For customers who are using the
PCS-11 Video Communication System
only)
Select this mode if the System does not
operate properly with the MODE 1
setting.
MODE 3: (For customers who are using the
PCS-11P Video Communication System
only)
Normally, select this mode.
MODE 4: (For customers who are using the
PCS-11P Video Communication System
only)
Select this mode if the System does not
operate properly with the MODE 3
setting.
English
MODE1
On
On
Save Cancel