Advertisement
1. TUNER ANT: Connect for FM antenna
2. AUDIO/CD/DVD INPUT JACKS
3. SUB OUT
4. B SPEAKER OUTPUT TERMINALS:
Connect other speaker system(s) to these terminals.
5. A SPEAKER OUTPUT TERMINALS: Connect other speaker system(s) to these
terminals.
6. VOLTAGE SELECTOR SWITCH: Slide to select correct voltage 115V or 230V.
7. POWER CORD: Connect to AC 115V/60Hz and 230V/50Hz outlet.
REMOTE CONTROL
1. Mute
2. Standby
3. Number pad
4. Mode: Input select key
5. Menu: Used to adjust Treble/Bass volume and Balance
6.
/SCAN:
In USB/MP3 MODE: Press to start or pause audio playback
In FM mode: Press and hold this button for more than 3 seconds, unit will auto
search and store stations.
6
www.PyleUSA.com
7. NEXT/CH+
In USB/MP3 Mode: Move forward through tracks
In FM Mode: Press to select next saved station
8. PREVIOUS/CH-
USB/MP3 Mode: Move back through tracks
In FM Mode: Press to select previous saved station
9. A/B channel selector
10. Tuning +:
In USB/MP3 MODE: Press to repeat current track.
In FM MODE: Press to move through the stations in single increments.
Tuning -:
In FM MODE: Press to move through the stations in single increments.
11. Mic Volume adjustment keys
12. Master Volume adjustment keys
Remote Controller Operation
1. Remote controller should be operated within 6 meter and the scope of 30° in
front of receiver.
2. Make sure that there is no big obstacle between remote controller and machine.
3. Remote sensor should be far away from the light, high amounts of light can
a ect its performance.
7
www.PyleUSA.com
Advertisement
