Advertisement
ATTENTION
1. A: Connect the audio input with the CD/DVD/TV audio output.
NOTES:
• These jacks does not support video signal, so make
sure that the CD/DVD/AUX terminal are connected.
• Noise will be heard when you connect the unit with
CD/DVD/TV video output by mistake.
2. B: Signal output that can be connected with other
ampli er or powered speakers.
3. STEPS FOR FM RADIO CONTROL
A. Connect the FM antenna before using the FM radio.
B. Press MODE button on the front panel or remote control to select FM mode.
C. Press PLAY/PAUSE button on the front panel or remote control, and will auto
scan and sore FM Radio station from 87.5Mhz to 108Mhz.
D. Press NEXT/PREV button to select the FM station.
4. REMOTE CONTROL
Remote control gives you commanding access only to USB/SD, Wireless BT and
FM functions and not the Master volume, microphone, bass, treble and other
functions.
1. Press this button to enter folder control mode in
USB or SD play mode.
2. Press these buttons to select 8 types DSP e ect
directly.
3. Press two buttons to adjust the sound Bass, BASS- is
to reduce bass output, BASS+ is to increase bass
output.
4. Press two buttons to select the previous or next
track in USB or SD or BT working mode, to select
previous or next station in FM working mode.
5. Press two buttons to adjust the sound Treble,
TREBLE- is to reduce TREBLE output, Bass+ is to
increase TREBLE output.
6. These buttons are Multifunction, press the numbers
to select the tracks directly. The units takes 2-3 sec.
to response in USB or SD mode. Hold these buttons
for 3 seconds to select source input. For example,
press and hold the 4 button for 3 seconds to select
the Bluetooth working mode.
7. Press this button to mute sound.
4
www.PyleUSA.com
Advertisement
