Remote Control - Pyle PLRM40F User Manual

Answer a Call
When the mobile phone is called, the incoming telephone number displays on
•
the LCD.
To receive the call, press the
•
Reject a Call or End a Call
To reject or end the call, press the
Switch Audio Between Car Audio and Mobile Phone
During a call, press the VOL knob button to switch the audio source from the car
audio system back to your mobile phone.
Adjust Talk Volume
During a call, use VOL knob or VOL+
•
Audio Streaming (A2DP)
/Mode button to enter BT mode and display pause in the LCD display.
1. Press the
2. When a mobile device is paired, music played through that device will automati
cally be heard through the car audio system.
3. Press the or
4. Press the button to pause or resume music playback.

REMOTE CONTROL

Name of buttons and location
(Power ON/OFF) Button switched on
1.
2. VOL +/VOL- (volume up/down)
3. Band button,
4. Button Tune down, seek down;
Track down, fast reverse
5. SEL (selection) button
6. button: Tune up, seek up; Track up, fast forward
7. Mute button, DEL (Delete) button
8. CLK (clock setting)
9. button, preset station 1 button, keypad 1
10. INT (intro) button, preset station 2 button,
keypad 2
11. RPT (repeat) button, preset station 3 button,
keypad 3
button on the control panel.
button on the control panel.
button to play the next or previous on the mobile phone.
(reply call)
button, (end call) button
/VOL-
button to adjust the volume level.
www.PyleUSA.com
11