Remote Control - Pyle PCM60A User Manual

REMOTE CONTROL

Remote control gives you commanding access only to USB/SD, Wireless BT and FM
functions and not the Master volume, microphone, bass, treble and other functions.
A. Please take out the battery sheet before using the remote control, otherwise the
remote control will not work.
B.
Press these two buttons to select the previous or next track in USB/SD or
Wireless BT mode, there is no response in the FM mode.
C.
Press this two buttons to select previous or next channel in FM mode,
there is no response in the USB/SD and BT mode.
D. Press these two buttons to increase or decrease Wireless BT volume, USB/SD
and FM. This buttons doesn't control the master volume.
E.
Press this button to auto scan all frequencies from 87.5MHz to 108MHz, the
unit will auto store the channels in FM mode. Please see 4, C for other details.
F.
Press this button to select one from play mode (USB/SD mode, FM mode and
Wireless BT mode). Turning ON the unit will set the USB/SD mode automatically.
MP3 les will be played automatically after inserting USB ash drive or SD card.
You cannot select the AUX, CD and DVD input with this button.
G. Press and hold this button for 5 seconds to turn ON or OFF the USB/SD,
Wireless BT and FM mode but not to power ON/OFF the unit. The unit will output
the signal in CD, DVD, AUX input mode if you turn OFF the USB/SD, Wireless BT
and FM.
H. Aim the remote controller at the receiver of the main unit.
1. Press this button to chose the ID3 display model, will show TITLE/ARTIST/ALBUM/OFF.
Hold this button for 5 second to turn ON or OFF the MP3.
2. When in the FM mode, press this two buttons to tune FM Frequency.
3. Press these two buttons to select the previous or next track in USB or SD or
Bluetooth mode, to select previous or next channel in FM mode.
4. Volume up or down
5. Press the numbers to select the tracks directly.
The unit takes 1-2 seconds to response in USB or SD mode.
6. Press this button to repeat mode.
4
www.PyleUSA.com