Step 6: Backguard Installation - Thermador P24GE Installation Instructions Manual

A Low Back backguard must be installed
when there is less than a 12" clearance
between combustibles and back edge of
cooktop. (See Fig. 1 and 5.) For island
installations and other installations with
over 12" clearance, an optional stainless
steel trim channel is available to cover the
backguard mounting flanges. Attach the
backguard before sliding the appliance
into the final installed position. Follow
Steps A through C below:
A. Slide backguard over the two flanges
on the rear of the appliance. Fasten
the front and back with the two screws
(see A, Fig. 12) provided.
B. Fasten the top of the backguard to
the wall with two screws through the
backguard. (See B, Fig. 12.)
C. Place the backguard cap on top and
fasten using the two counter-sink
screws provided. (See C, Fig. 12.)
LOW BACK AND ISLAND TRIM MODEL NUMBERS
Cooktop Size/Type
24" Griddle
24" Wok
30"
36"
48"
*Requires a minimum of 12" horizontal clearance between back of appliance and combustible materials.

Step 6: Backguard Installation

FIG. 12 Low Back Attachment
12" Low Back
PC24LB
GP24LBS
PC30LB
GPS36LBS
GPS48LBS
C
B
A
Island Trim*
PC24IT
GP24ITS
PC30IT
GPS36ITS
GPS48ITS
12