On-Command Drive Knob "2Wd/4Wd/Diff. Lock - Yamaha YXZ10YEXR Owner's Manual

This switch is used when operating the winch
(page 5-47). Read this manual and the Winch
Owner's Manual completely before operating
the winch switch.
EBU39121
On–Command drive knob
"2WD/4WD/DIFF. LOCK"
1 1 1

1. On-Command drive knob "2WD/4WD/DIFF. LOCK"

Stop the vehicle and move the On–Command
drive knob to change the drive mode to two–
wheel drive, four–wheel drive, or four–wheel
drive with differential lock. Select the appro-
priate drive according to the terrain and driv-
ing conditions.
 "2WD" (two–wheel drive): Power is sup-
plied to the rear wheels only.
 "4WD" (four–wheel drive): Power is sup-
plied to the front and rear wheels.
 "DIFF. LOCK" (four–wheel drive with the
differential gear locked): Power is supplied
to the front and rear wheels with the differ-
ential gear locked. Unlike standard four–
wheel drive, all wheels turn at the same
speed regardless of traction.
TIP
Maximum vehicle speed is limited to approx-
imately 65 km/h (40 mi/h) when "DIFF. LOCK"
is selected.
5-21
5