Light Switch; On-Command Drive Knob "2Wd/4Wd/Diff. Lock - Yamaha VIKING 2021 Owner's Manual

EBU31391

Light switch "

1
5
1. Light switch " /
L
Set the switch to "
beam and the taillights.
Set the switch to "
beam and the taillights.
Set the switch to "
lights and taillights.
ECB02061
NOTICE
Do not use the headlights with the engine
turned off for an extended period of time.
The battery may discharge to the point
/ / "
L
H
/ "
H
" to turn on the low
L
" to turn on the high
H
" to turn off the head-
that the electric starter will not have
enough power to crank the engine. If this
should happen, remove the battery and re-
charge it.
EBU39121
On–Command drive knob
"2WD/4WD/DIFF. LOCK"
1

1. On-Command drive knob "2WD/4WD/DIFF. LOCK"

Stop the vehicle and move the On–Command
drive knob to change the drive mode to two–
wheel drive, four–wheel drive, or four–wheel
5-11