Yamaha YXZ10YEXR Owner's Manual page 150

2
3
4
5
1. Engine oil tank filler cap
2. O-ring
3. Engine oil dipstick
4. Maximum level mark
5. Tip of the engine oil dipstick
5. Insert the dipstick back into the oil tank
9 (without screwing it in), and then remove
it again to check the oil level.
6. If the oil level is below the tip of the dip-
stick, add oil.
TIP
Add oil a little at a time so as not to overfill be-
yond the maximum level mark.
7. Check the O-ring for damage, and re-
place it if necessary.
8. Install the engine oil tank filler cap.
9. Install the panel.
To change the engine oil
1 1
1. Park the vehicle on a level surface.
2. Remove panel D. (See page 9-13.)
3. Remove the engine oil tank cover by re-
moving the bolts.
1. Engine oil tank cover
2. Bolt
4. Start the engine, warm it up for several
minutes, and then turn it off.
9-25
2 2
1 1 1