Yamaha YXZ10YEXR Owner's Manual page 64

TIP
The spring preload setting is determined by
measuring distance A, shown in the illustra-
tion. The shorter distance A is, the higher the
spring preload; the longer distance A is, the
lower the spring preload.
Spring preload setting:
5
Minimum (soft):
Distance A =
496.6 mm (19.55 in)
Standard:
Distance A =
483.9 mm (19.05 in)
Maximum (hard):
Distance A =
471.2 mm (18.55 in)
1. Distance A
5. Tighten the locknut to the specified
torque. NOTICE: Always tighten the
locknut against the adjusting nut, and
then tighten it to the specified torque.
[ECB00082]
Tightening torque:
Locknut:
41 N·m (4.1 kgf·m, 30 lb·ft)
6. Install the hood.
5-34
1 1 1