Yamaha YXZ10YEXR Owner's Manual page 165

1. Maximum level mark
2. Minimum level mark
4. If the coolant is at or below the minimum
level mark, remove panel C. (See page
9-13.)
5. Remove the coolant reservoir cap, add
coolant up to the maximum level mark,
and then install the cap. NOTICE: If cool-
ant is not available, use distilled water
or soft tap water instead. Do not use
hard water or salt water since they are
harmful to the engine. If water has
been used instead of coolant, replace
1
2
9-40
it with coolant as soon as possible,
otherwise the cooling system will not
be protected against frost and corro-
sion. If water has been added to the
coolant, have a Yamaha dealer check
the antifreeze content of the coolant
as soon as possible, otherwise the ef-
fectiveness of the coolant will be re-
duced.
[ECB01012]
1. Coolant reservoir cap
6. Install the panel when finished servicing
the vehicle.
1 1 1
9