Light Switch; On-Command Drive Knob "2Wd/4Wd/Diff Lock - Yamaha VIKING YXM70VPXK 2016 Owner's Manual

Table of Contents

Advertisement

EBU31391

Light switch "

/
L
1
1. Light switch "
/
/
L
H
Set the switch to "
beam and the taillights.
Set the switch to "
H
beam and the taillights.
Set the switch to "
lights and taillights.
ECB02061
NOTICE
Do not use the headlights with the engine
turned off for an extended period of time.
The battery may discharge to the point
/
"
H
"
" to turn on the low
L
" to turn on the high
" to turn off the head-
that the electric starter will not have
enough power to crank the engine. If this
should happen, remove the battery and re-
charge it.
EBU31402
On–Command drive knob
"2WD/4WD/DIFF LOCK"
1

1. On-Command drive knob "2WD/4WD/DIFF LOCK"

Stop the vehicle and move the On–Command
drive knob to change the drive mode to two–
wheel drive, four–wheel drive, or four–wheel
4-11
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Viking yxm70vpak 2016Viking xm70vphk 2016

Table of Contents