Table of Contents
Advertisement
07
Install the decorative
ring by aligning
the ring's slots with the
screws on the mounting
plate. Rotate the ring
clockwise to lock in
place.
09
Attach light plate to motor assembly
with light plate screws
08
Attach a blade to the fan motor
assembly by inserting the blade into
slots in the side of the fan motor
assembly and aligning the three
screws holes in the blade with the
holes in the centre flywheel and
secure with screws. Make sure all the
screws are firmly tightened. Repeat
these steps for the remaining blades.
Note: Ensure that the blade side
indicated "This side up" is facing the
ceiling for correct blade installation.
1 1 1 5
Advertisement
Chapters
Table of Contents
