Table of Contents
Advertisement
ASSEMBLY
INSTRUCTIONS
10-1
10
Connect the LED wires connector
plug exiting the bottom of the fan
motor assembly to the LED socket
of the light plate (10-1), align the
hole of the main connecting LED,
and lock the screws which are pre-
locked on the host to fix the LED
plate (10-2).
11
Place the shade into the light plate,
aligning the three flat areas on the top
flange of the shade with the raised
dimples in the light kit pan. Turn the
shade clockwise until it stops and is
secure.
10-2
16
Advertisement
Chapters
Table of Contents
