Servicing And Maintenance - Vent-Axia 496711 Instruction Manual

For the user

Servicing and maintenance

WARNING: THE FAN AND ANCILLARY CONTROL EQUIPMENT MUST BE
ISOLATED FROM THE POWER SUPPLY DURING MAINTENANCE.
Strong solvents should not be used on the fan.
The fan must not be dipped in or sprayed with water. For the
fan to operate correctly it must be cleaned at least twice a
year, more often if
necessary.
– Before cleaning, switch off the power to the fan
(Figure U).
– Loosen the motor unit by grasping it (Figure V), prise off
the motor unit by leveraging the cap with your knuckles.
Ensure that you have the motor unit in a secure grip so
you do not drop it when it loosens.
0
0
1
1
10
– Clean opening, the duct and the motor unit with a damp
cloth (if necessary, use a mild detergent).
– The impeller does not detach and should be wiped clean
in its position on the motor housing
– If the fan has an external backdraught shutter the shutter
should be cleaned gently.
– Replace the motor unit in the frame.
Eco
Discarded fans should be submitted as electronic waste to
the recycling centre.
U. V.
Operating and installation instructions