Technical Data - IGEA BIOSTIM SPT User Manual

IGEA
IGEA

TECHNICAL DATA

7.
BIOSTIM SPT complies with MDD 93/42 EEC and subsequent amendments and is
under the control of IMQ.
BIOSTIM SPT has a expected lifetime of five years .
BIOSTIM SPT Generator
Model
Power supply
Max. absorbed power
Classification according to EN 60601-1
Classification according to MDD 93/42 EEC
Method of use: Appliance for continuous use not to be used in the presence of anaesthetic mixtures
inflammable on contact with air, oxygen, or nitrous oxide.
Unit with casing having a degree of protection IP10.
Characteristics of coil's pilot signal & magnetic field intensity:
Signal type
Signal frequency
Duty Cycle
Magnetic field intensity
External power supply
Model*
Brand*
Input voltage
(wide band)
Mains frequency
Max. absorbed
power
Output voltage
Max. output
voltage
Overload
protection
Insulation
category
*IGEA reserves the right to provide different models of power supply, tested and approved for the
system according to the standards EN60601-1, EN 60601-1-2; use only the power supply provided
directly by the manufacturer.
Environmental condition of use
Atmospheric temperature
Relative humidity
Atmospheric pressure
Environmental transportation and storage conditions
Atmospheric temperature
Relative humidity
Atmospheric pressure
Note: After removing the device from its packaging it is considered that the conditions of use are also
valid for transport and storage.
Warning: This device is not to be used in areas in which an explosion risk exists.
22 22
BIOSTIM SPT – User Manual
: BIOSTIM SPT
: 12 VDC
: 0,8 A.
: Class II with Applied Part of Type BF
: IIa
: Square wave
: 75 Hz.
: 10% (1,33 msec)
: 20-30 Gauss (peak value)
MENB1020A1203B01
AULT - SL Power
230VAC (100-240)
50-60Hz
0,100 A
12VDC
1,5A
Internal self-resetting protection
II
:0 - 40°C
: 30% - 75%
: 700-1060hPa
: -20 - +70°C
: 10% - 90%
: 500 - 1060hPa
BIOSTIM SPT User Manual-EN
ME20A1203B01
230VAC (100-240)
Protezione continua interna
auto-ripristinante
marked
0051
SL Power
50-60Hz
0,200 A
12 VDC
1,5 A
II
pag. 22