Table of Contents
Advertisement
7
Operating
7.1 Starting the device
7.2 Main menu
CAUTION!
Risk of injury due to movements of the device
The head of the device can move quickly (pan, tilt) and can produce
very bright light. This is also valid immediately after you turn on the
device, when the device operates in automatic mode or under remote
control and when you turn off a DMX controller that is connected to the
device. Persons staying near the device could be injured or frightened.
Before you turn on the device and during the operation, always ensure
that nobody stays close to the device. If work has to be performed in the
area of movement or in the near vicinity of the device, it must remain
turned off.
Connect the device to the power grid and turn it on with the main switch to start
operation. After a few seconds, the fans start to work, the head moves to the home
positions for rotation (pan) and inclination (tilt), the screen displays a start message.
After a few more seconds, the device operates in the last set mode.
If you don't press any button for about 30 seconds, the device returns automatically
to the main menu. The set values are retained even when the device is disconnected
from the mains power supply.
1.
Press
to activate the main menu.
2.
Press
or
to select a menu item.
3.
Confirm the selection with .
4.
Use
or
to change the respectively displayed value.
5.
When the display shows the desired value, press .
6.
To exit a menu item without making changes, press .
7.
To return to the main menu, press .
As soon as you activate the main menu, the DMX control and a currently
running automatic show are being interrupted. The movable head of the
unit moves to its home position.
If you close the main menu without making changes, the unit continues to
operate with the previous settings.
All previously made settings are retained even when you disconnect the device from
the power grid.
Operating
Infinite Pixel 250
15
Moving Head
Advertisement
Table of Contents
